Installing a Brick Paver Walkway or Ash Bricks

The usage of Bricks or Pavers to produce a sidewalk or patio matches a house in a method that is unmatched. In addition, setting up a Brick or Paver walkway does not always need a pro.

The key to installing a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be installed. In addition, string lines ought to be strung on each side of the pathway.
As soon as the location has been dug down, 3/4" gravel stone should be laid in and tamped down tightly. Then 2" of sand, or stone dust must be topped the gravel. Once again the sand/stone dust should be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline need to equate to the density of the brick or paver.

Now that you have a stable base, place a 1" pipeline or journal board the length of the pathway on either side of the walkway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready location. These strips will act as your sidewalk border and assistance to preserve the integrity and shape of the pathway. You can get these plastic strip borders at many home enhancement stores. The strips should be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

You can then begin to lay the bricks/pavers as soon as this is done. There are many patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist maintain the integrity of the walkway.

Inevitably bricks/pavers will need to be cut or split when constructing the sidewalk. To more info actually cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you desire to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with extra sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the cracks. Repeat this process a couple of times to make sure the fractures are completely filled. This will finish the interlocking of the bricks and help to get rid of any weed growth. Simply include grass seed to the outdoors edges and you should have a beautiful entryway to your house within a couple of weeks.


In addition, setting up a Brick or Paver sidewalk does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipe or journal board the length of the pathway on either side of the walkway. These strips will act as your sidewalk border and aid to preserve the stability and shape of the pathway. Inevitably bricks/pavers will require to be cut or divided when developing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *